dental press block

1.Product Introduction:

The Dental Press Block, produced by our company, is a high-quality dental product designed to meet the needs of dental professionals. This innovative block is specifically created for use in dental pressing techniques, providing excellent results for various dental restorations.

It has highly liberated aesthetics and is popular with dental technicians worldwide for its exquisite design experience, good strength and design precision.

2.Product Parameter (Specification):

Material: Premium dental ceramic

Available Size/color

3.Indications

·High plasticity

Can produce veneers as thin as 0.25mm

·Stability

Has excellent edge stability

·High castability

Have a smooth hot die casting experience

Attention

Veneer

·When conditions permit,the preparation should be in the enamel layer

·Preparetion of the cutting edge can not be localed in a static or dynamic occlusal surface

·Neck region or lip thickness was prepared 0.6mm the above

·Margin thickness prepared 0.7mm the above.

Front crown

·Grooves must be rounded edge of the wall or shoulder.

·Preparation shoulder width of at least 1mm

·The cutting edge having a thickness of about 1.5mm

·Having a thickness of buccal or lingual region of about 1.2mm

Inlay

·Preparation depth of at least 1mm.

·Fissure width separating edge region at least 1mm.

·Preparation of the adjacent wall surface at an obtuse angle,The angle between the wall and the Inlay caries contact surface to 100-120 degrees.

·Not prepared and feathering feathered edges.

4.case